I heard of a printing company before the introduction of the CTP due to the use of improper, and wanted to replace other types of CTP, the boss can not help to choose their own mistakes or incorrect use and lamented the application of.CTP does bring unlimited convenience for plate making workshop, also brings great changes to the printing quality and efficiency, but the machine after all it is a machine, and a person, will get sick, will strike if CTP as never wear equipment to see whether it is completely mistaken, from the application, hardware maintenance, always need careful care, this is often the boss pay attention to maintenance equipment used for stable operation, and never go into Want to maintain the polarization phenomenon even more problems make CTP pay more time, this paper from another angle to see the short board of the use of CTP plate making workshop, and thus more efficient use of CTP.
A short board, the plan of purchase
Now the purchase of CTP whether imported or domestic all kinds of uneven quality, and as a two printing machines and printing more, if you consider CTP, must not blind to the low price of CTP as the first choice, but from the process compatibility, hardware configuration, scalability, reliability, and good the training and customer service service as the primary condition. I believe the cost spent, if you can buy a worry of equipment is worth it. From the purchase of CTP will give full consideration to the whole process of equipment usability, compatibility and upgrading is an indispensable step, if these important conditions ignore the purchase, Short board CTP plate making workshop begins.
Two, hardware installation short board
After the purchase of CTP hardware installation as the most important part, often overlooked, the engineers and the printing plant sometimes, the owner of a printing factory purchased the CTP into the factory, began urging engineers led some installation wantonly, installation considerations are ignored, the author found that a large number of similar cases in the process of field maintenance, for example:
2.1, the power supply line, air conditioning switch selection, the hot wire burned out.
2.2, UPS not see off the power is not enough, did not start power supply.
2.3, air compressor and cold and dry machine improper installation, inadequate drainage, water pipe.
2.4, CTP around the gap is too small, the foot is rough, when the machine shaking.
2.5, developing machine not in accordance with the standard adjustment, rubber roller, brush pressure parameters, to feel after developing the plates from dirty uneven scratches.
2.6, hardware fasteners, the physical location of the laser head to adjust properly, resulting in coherent printing of different types of faults.
In summary, we can see the importance of hardware installed in the CTP after the introduction, ignore a small action, are likely to cause future problems in use.
Three, short board installation process and Application
Some people think that as long as the installation process is completed for the system setup impeccable, simply ignore, clear requirements in some system installation process in the manual version and the corresponding patch can guarantee a certain period of time the process stability. If not in accordance with the requirements of direct installation may lead to the following questions:
3.1, the process could not identify the system\'s hard drive, which can\'t be read.
3.2, printer or output connection failed, no output file to CTP.
3.3, can not generate the corresponding color file or TIFF file 1
3.4, unable to import working file, cannot find the specified path to work.
3.5, sent to the CTP file exposure failed.
3.6, the network can not connect, only a single work, reduce the efficiency of work.
3.7, anti-virus software is not set correctly lead to system collapse.
3.8, process software cannot start or start immediately after the interruption.
Short board process and application, led directly to the CTP to work, it will delay the time, while to process applications lose confidence. So in the process of the installation process and debug the application, we must be careful, attention, in order to reduce the short board.
