This article will take our company＇s Kodak peak 1000 high-speed inkjet printer as an example, the interpretation of high-speed inkjet printing machine operating specifications and related matters of attention, for your reference.
Kodak peak 1000 high speed inkjet printing machine using the stream continuous inkjet technology, compact structure, is a monochrome, high-speed inkjet printing machine, the most wide format printing can reach 62.23 cm (24.5 inches), the maximum printing speed is 200 m / min (659 feet / minute), a per minute can be printed 3600 pieces of A4 paper. Its powerful capacity make up the sheet of paper laser digital printing machine capacity, at relatively low cost, to fill the blank of 300 ~ 1000 between the short version of the black and white book printing market.
Although Kodak＇s peak 1000 high-speed inkjet printing machine production capacity is huge, but to make full use of the utility, but also do a lot of work.
Standardization operation of high speed inkjet printer
High speed inkjet printing technology in the application of our company is not independent, but has matched after binding solutions, including Switzerland hunkeler book core connection system, Japanese horizon glue and three side cutting equipment. However, in order to operate these devices, to achieve efficient production, not only have excellent technology, must cultivate the good operation habit and standardized operating procedures.
(1) after the device is turned on, first check the machine there is no exception, the operation of the server interface with the error.
(2) print also proofs before, operators need to Kodak peak 1000 high speed inkjet printing machine do the normal maintenance preparations, such as dust-free paper wipe ink eye lid, check that the paper is centered, check read printed indicia of the eye position is appropriate.
(3) in Kodak peak 1000 high speed inkjet printing machine to work at the same time, the operator on the road after hunkeler book core connection system to do maintenance work preparation. For example, check the way of paper pressing wheel, long line knife, check and read slitting and a marker of the eye position is appropriate, plastic spray head can normal work.
(4) finish above work began to print also proofs. Printing needs to be checked for Kodak peak 1000 high speed inkjet printing machine ink, the quality of nozzle, suture and sets of positive and negative and each unit can work normally; hunkeler book core connection system of the paper is not centered, long lines and 2 pieces of folded plate position is accurate. Such as three folding the first fold creases gap can not be more than 2mm, if any do not reach the designated position began formal printing more details, will likely to induce the stop unnecessary.
